dmesg - 2016-01-11 11:40
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-25-generic (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fffffff] ACPI data
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
CPU MTRRs all blank - virtualized system.
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
[mem 0x3fc00000-0x3fdfffff] page 2M
init_memory_mapping: [mem 0x20000000-0x3fbfffff]
[mem 0x20000000-0x3fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x3fe00000-0x3ffeffff]
[mem 0x3fe00000-0x3ffeffff] page 4k
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
RAMDISK: [mem 0x359ea000-0x36cecfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
ACPI: XSDT 0x000000003FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 0x000000003FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 0x000000003FFF0470 001CEB (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 0x000000003FFF0200 000040
ACPI: APIC 0x000000003FFF0240 000054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 0x000000003FFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000003ffeffff]
NODE_DATA(0) allocated [mem 0x3ffeb000-0x3ffeffff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:3ffe7001, primary cpu clock
[ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0x3ffeffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x3ffeffff]
Initmem setup node 0 [mem 0x00001000-0x3ffeffff]
On node 0 totalpages: 262030
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 4032 pages used for memmap
DMA32 zone: 258032 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x40000000-0xfffbffff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88003fc00000 s86144 r8192 d32640 u2097152
pcpu-alloc: s86144 r8192 d32640 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 257913
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 995540K/1048120K available (7918K kernel code, 1172K rwdata, 3752K rodata, 1408K init, 1292K bss, 52580K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16640 nr_irqs:256 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0.
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Detected 3498.074 MHz processor
Calibrating delay loop (skipped) preset value.. 6996.14 BogoMIPS (lpj=13992296)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
mce: CPU supports 0 MCE banks
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 29988 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz (fam: 06, model: 3c, stepping: 03)
APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
APIC delta adjusted to PM-Timer: 6374897 (6205353)
Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
KVM setup paravirtual spinlock
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (6996.14 BogoMIPS)
NMI watchdog: disabled (cpu0): hardware events not enabled
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
pinctrl core: initialized pinctrl subsystem
RTC time: 2:08:09, date: 01/11/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20141107/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffdfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
ACPI: Enabled 2 GPEs in block 00 to 07
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp: PnP ACPI: found 2 devices
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19468K (ffff8800359ea000 - ffff880036ced000)
platform rtc_cmos: registered platform RTC device (no PNP device found)
RAPL PMU detected, hw unit 2^-0 Joules, API unit is 2^-32 Joules, 4 fixed counters 10737418240 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x40, revision=0x0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 256 (order: 2, 16384 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1452478095.659:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
mtrr: your processor doesn't support write-combining
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000200000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI PCI host controller
usb usb1: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
usb usb1: SerialNumber: 0000:00:06.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:69:106
rtc_cmos rtc_cmos: setting system clock to 2016-01-11 02:08:09 UTC (1452478089)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
systemd-udevd[100]: starting version 204
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:d7:59:c8
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
scsi host2: ahci
ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
usb 1-1: new full-speed USB device number 2 using ohci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 209715200 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 > sda4
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: USB Tablet
usb 1-1: Manufacturer: VirtualBox
hidraw: raw HID events driver (C) Jiri Kosina
tsc: Refined TSC clocksource calibration: 3485.206 MHz
EXT4-fs (sda6): orphan cleanup on readonly fs
EXT4-fs (sda6): 1 orphan inode deleted
EXT4-fs (sda6): recovery complete
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input5
hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
floppy0: no floppy controllers found
work still pending
random: init urandom read with 47 bits of entropy available
init: plymouth-upstart-bridge main process (154) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (164) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k FS
systemd-udevd[275]: starting version 204
lp: driver loaded but no devices found
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input7
vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
vboxguest: Successfully loaded version 4.3.22_Ubuntu (interface 0x00010004)
random: nonblocking pool is initialized
audit: type=1400 audit(1452478093.574:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=395 comm="apparmor_parser"
audit: type=1400 audit(1452478093.574:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=395 comm="apparmor_parser"
audit: type=1400 audit(1452478093.574:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=395 comm="apparmor_parser"
audit: type=1400 audit(1452478093.574:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=395 comm="apparmor_parser"
audit: type=1400 audit(1452478093.574:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=395 comm="apparmor_parser"
audit: type=1400 audit(1452478093.574:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=395 comm="apparmor_parser"
snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM optimization
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: no valid rapl domains found in package 0
snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
ppdev: user-space parallel port driver
floppy0: no floppy controllers found
work still pending
init: failsafe main process (514) killed by TERM signal
audit: type=1400 audit(1452478215.226:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=899 comm="apparmor_parser"
audit: type=1400 audit(1452478215.226:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=899 comm="apparmor_parser"
audit: type=1400 audit(1452478215.226:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=899 comm="apparmor_parser"
audit: type=1400 audit(1452478215.226:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=899 comm="apparmor_parser"
audit: type=1400 audit(1452478215.226:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=899 comm="apparmor_parser"
audit: type=1400 audit(1452478215.234:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=899 comm="apparmor_parser"
audit: type=1400 audit(1452478215.234:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=901 comm="apparmor_parser"
init: plymouth-upstart-bridge main process (170) killed by TERM signal
gsettings[2499]: segfault at 20 ip 00007ff3c9a49f53 sp 00007ffeebe66e18 error 6 in libgio-2.0.so.0.4002.0[7ff3c9997000+16c000]
gsettings[2503]: segfault at 20 ip 00007f71e40a1f53 sp 00007fff58c33748 error 6 in libgio-2.0.so.0.4002.0[7f71e3fef000+16c000]
gsettings[2506]: segfault at 20 ip 00007f227f756f53 sp 00007ffcf6bb4458 error 6 in libgio-2.0.so.0.4002.0[7f227f6a4000+16c000]
gsettings[2814]: segfault at 20 ip 00007f6d7acb6f53 sp 00007ffe78815e18 error 6 in libgio-2.0.so.0.4002.0[7f6d7ac04000+16c000]
gsettings[2817]: segfault at 20 ip 00007f621c2c3f53 sp 00007ffd04adf188 error 6 in libgio-2.0.so.0.4002.0[7f621c211000+16c000]
gsettings[2820]: segfault at 20 ip 00007f6cf346bf53 sp 00007ffe3d023408 error 6 in libgio-2.0.so.0.4002.0[7f6cf33b9000+16c000]
gsettings[3597]: segfault at 20 ip 00007ffbeecf6f53 sp 00007ffd3eee3d78 error 6 in libgio-2.0.so.0.4002.0[7ffbeec44000+16c000]
gsettings[3600]: segfault at 20 ip 00007f0d4598bf53 sp 00007fff5877c658 error 6 in libgio-2.0.so.0.4002.0[7f0d458d9000+16c000]
gsettings[3603]: segfault at 20 ip 00007fd67fccaf53 sp 00007fff14e54fd8 error 6 in libgio-2.0.so.0.4002.0[7fd67fc18000+16c000]
gsettings[4673]: segfault at 20 ip 00007ff10f92af53 sp 00007fff815cd798 error 6 in libgio-2.0.so.0.4002.0[7ff10f878000+16c000]
gsettings[4676]: segfault at 20 ip 00007f8db936ff53 sp 00007ffce6bd7048 error 6 in libgio-2.0.so.0.4002.0[7f8db92bd000+16c000]
gsettings[4679]: segfault at 20 ip 00007fb2ff3e3f53 sp 00007ffc91f018c8 error 6 in libgio-2.0.so.0.4002.0[7fb2ff331000+16c000]
gsettings[18056]: segfault at 20 ip 00007f5983eb4f53 sp 00007ffcc5c27cd8 error 6 in libgio-2.0.so.0.4002.0[7f5983e02000+16c000]
gsettings[18059]: segfault at 20 ip 00007f0325125f53 sp 00007ffc11a37538 error 6 in libgio-2.0.so.0.4002.0[7f0325073000+16c000]
gsettings[18062]: segfault at 20 ip 00007fbe71b66f53 sp 00007fff2e1a5bc8 error 6 in libgio-2.0.so.0.4002.0[7fbe71ab4000+16c000]
gsettings[19622]: segfault at 20 ip 00007f9000741f53 sp 00007ffcf39e65a8 error 6 in libgio-2.0.so.0.4002.0[7f900068f000+16c000]
gsettings[19625]: segfault at 20 ip 00007facdb267f53 sp 00007ffd987d9788 error 6 in libgio-2.0.so.0.4002.0[7facdb1b5000+16c000]
gsettings[19628]: segfault at 20 ip 00007fdd0180af53 sp 00007ffe75f72c38 error 6 in libgio-2.0.so.0.4002.0[7fdd01758000+16c000]
gsettings[19706]: segfault at 20 ip 00007f60e388df53 sp 00007ffec64d9518 error 6 in libgio-2.0.so.0.4002.0[7f60e37db000+16c000]
gsettings[19709]: segfault at 20 ip 00007f1c79100f53 sp 00007ffc2eeac488 error 6 in libgio-2.0.so.0.4002.0[7f1c7904e000+16c000]
gsettings[19712]: segfault at 20 ip 00007f2978493f53 sp 00007ffd6e0d53c8 error 6 in libgio-2.0.so.0.4002.0[7f29783e1000+16c000]
gsettings[19802]: segfault at 20 ip 00007f150ea20f53 sp 00007fff08abfe88 error 6 in libgio-2.0.so.0.4002.0[7f150e96e000+16c000]
gsettings[19805]: segfault at 20 ip 00007f5b0d0d9f53 sp 00007ffe7c83c5e8 error 6 in libgio-2.0.so.0.4002.0[7f5b0d027000+16c000]
gsettings[19808]: segfault at 20 ip 00007f9f0aa38f53 sp 00007fff57e44418 error 6 in libgio-2.0.so.0.4002.0[7f9f0a986000+16c000]
gsettings[20069]: segfault at 20 ip 00007fd4cbafcf53 sp 00007ffd61803918 error 6 in libgio-2.0.so.0.4002.0[7fd4cba4a000+16c000]
gsettings[20072]: segfault at 20 ip 00007fa3d5e32f53 sp 00007ffc0b021bb8 error 6 in libgio-2.0.so.0.4002.0[7fa3d5d80000+16c000]
gsettings[20075]: segfault at 20 ip 00007fd6b90def53 sp 00007ffe8b6e5588 error 6 in libgio-2.0.so.0.4002.0[7fd6b902c000+16c000]
gsettings[20287]: segfault at 20 ip 00007fd30f606f53 sp 00007ffc5b9fbf48 error 6 in libgio-2.0.so.0.4002.0[7fd30f554000+16c000]
gsettings[20290]: segfault at 20 ip 00007f0a6e642f53 sp 00007ffe6af06228 error 6 in libgio-2.0.so.0.4002.0[7f0a6e590000+16c000]
gsettings[20293]: segfault at 20 ip 00007f0bceb2ef53 sp 00007ffc685e0c18 error 6 in libgio-2.0.so.0.4002.0[7f0bcea7c000+16c000]